• For customers who generate their own electricity using small-scale energy systems, net metering measures the difference between the electricity you buy from Okanogan County PUD and the excess electricity you produce using your own generating equipment.

• Your electric meter keeps track of this “net” difference as you generate excess electricity and take electricity from the electric grid.

[back to top of page]

• Basically, net metering is a special metering and billing arrangement between you and Okanogan County PUD.

• Normally, your electric meter runs “forward” as it measures the amount of electricity that the PUD sends into your home or business.

• If your generation system makes more electricity than you need at any given time, net metering allows this electricity to run “backward” through the meter and out into the electric grid. This causes the meter to run in reverse, which means you get full retail value for the electricity you generate.

• Net metering can usually be accomplished using a special meter at your home or business. In some cases, the PUD or the customer may choose to install an additional meter to separately measure the output of your generating system. If this is the case, the electricity generated will be subtracted from the electricity consumed by the customer to determine the net consumption or net excess generation (NEG).

[back to top of page]

• Just as we do now, we will continue to read your meter and you will receive electric bills on your normal billing schedule.

• If you use more energy than you generate in a given billing cycle, you would be a “net consumer,” and the net consumption would appear as a charge on the current bill.

• If your meter ran backward more than forward in a given billing cycle, you would be a “net generator” for that billing cycle, and the NEG would appear as a credit on your next bill.

• In all cases, a monthly minimum customer charge will be applied. This is the same charge that applies to all customers, regardless of whether or not they are net metering customers.

[back to top of page]

• By generating your own electricity, you reduce your electricity bills. 

• With a net metering arrangement, any excess electricity that you generate and do not use can be fed back to the utility, which will again reduce your electricity bill. Your excess electricity now offsets electricity you would otherwise have to buy at full retail prices, and this makes owning your own generating system more cost-effective.

• Without net metering, one alternative would be to purchase batteries to store the excess power for later use. Having your own battery storage for electricity is very expensive, and would typically only benefit you during a period when the District’s power is off for some reason. We suggest serious consideration be given to this cost/benefit issue before choosing to install a battery back-up system.

• Net metering customers may also participate in the District's SNAP (Sustainable Natural Alternative Power) program as a producer.  SNAP producers are eligible to receive a portion of the SNAP program funds as production credits to help offset the initial purchase of their system. 

• Another alternative to net metering is to arrange for metering and sale of the electricity you generate as a “qualifying facility” under PURPA rules. Typically, this type of installation is more expensive, since separate metering equipment is required. In addition, all electricity you generate would be credited at the District’s “avoided cost,” which is usually less than half the retail rate. Net metering allows you to get credit for most of the energy you generate at the retail rate.

[back to top of page]

• In Washington, any electricity customer who generates at least some of their electricity is potentially eligible for net metering.

• Solar, hydro, wind or some combination of these resources must power your generating system.  It could also be a fuel cell. Other types of generating systems are not eligible for net metering.

• The generating system has a capacity of not more than 25 kilowatts.

[back to top of page]

• A net metering system used by a home owner or business must include, at the customer’s own expense, all equipment necessary to meet applicable safety, power quality, and interconnection requirements established by the National Electrical Code (NEC), national electrical safety code, the Institute of Electrical and Electronics Engineers (IEEE), and Underwriters Laboratories (UL), and any applicable state and local agencies.

• These Interconnection Standards are listed after the Okanogan County PUD’s Net Metering Application in this packet.

• Okanogan County PUD must approve your system before you connect to the electric grid.

[back to top of page]